Buck Hollow Sporting Goods - click or touch to visit their website Midwest Habitat Company

Late summer project

NWBuck

PMA Member
Put the finishing touches on a late summer project some friends and I worked on during the last couple of weeks...think it turned out pretty nice all things considered.

P1050552.jpg


Once we got it in place, I tended to a few last minute details (painting, shooting lanes, etc) while Hunter did his part on a late season flush of button weeds in the turnip patch. A view from inside the wagon blind.

P1050555.jpg


NWBuck
 
Nice work on the blind, I swear some of these blinds are nicer than the first house we lived in! :D
 
what did you do for windows? I have one under construction just like that rightnow, and havent figured out what to use. Thanks
 
what did you do for windows?

That's the most important part of the project in my opinion. We use plexiglass, and make a groove for the plexiglass to slide in using 1x4 or even 1x2. Add in some weatherstripping and it does a pretty nice job of keeping out wind and rain.

I didn't take pics of the windows in this one, but for reference, here's what the window looks like in another blind we made a couple years back.

P1020562.jpg


The window in the picture is 1 foot high and 2 feet wide, and the blind sits up about 6 feet off the ground. You can see these are horizontal sliders. In the wagon blind in the original post, we decided to make the windows taller. 18 inches high and 2 feet wide...primarily to make it easier to shoot a bow out of. As a result, we had to make the sliders vertical rather than horizontal. We can either open them manually, or if you look close you can see a rope hanging in front of the window. This is run through a fence staple near the roof to create a sort of pulley system. Pretty slick actually. Anyway, that gives you a basic idea, but the sliding plexiglass system is what we've found is the easiest to make, quiet during the hunt, and reasonably weatherproof. Good luck.

NWBuck
 
Top Bottom