Buck Hollow Sporting Goods - click or touch to visit their website Midwest Habitat Company

New V Tec setup

J

Jdubs

Well-Known Member
I went out on a limb and bought a new setup, here it is:

Hoyt VTEC 70lbs.
Carbon Xpress Maxima shafts (new for 05)(Was shooting Easton XX78 2315's)
Copper John Pro II sights
Tru Ball Tornado release (Was shooting Winn Archery Free Flight release)
Montec G5 heads 125gr. (to compare to Muzzy's I now have)
Doinker stabilizer
Hoyt quiver (detachable)

Chose Copper John over Toxonics Top Gun sight - Hope it was right choice.
 
waytogo.gif
 
Supertec,

Was waiting for your response. A little nervous about the sight choice and the Maxima choice.
Decided not to go with the FUSE stuff and the Maxima is brand new.
What do you think?
 
Not sure when the fuse accessories will hit the market for sure, probley seomtime next month. I am going to go all Trophy Ridge this year, they have some really hot new products coming out in my opinion. They should hit stores the 1st of feb! Dont know too much about the maxima stuff? I'm shooting fatboys for 3D and probley toy around with the acc super slims for hunting this year, probley stick with old faithful 2219's or 2315's from easton!
 
My V Tec came in last week
waytogo.gif


Right off the bat I'm putting on a fresh set of Winner's Choice strings (the fuzzy ones)
grin.gif


Spott-Hogg - Hogg It sight
Trophy Taker Rest
Not sure of the peep site yet - what is the biggest I can get?

Now I will be set I can hang with Hoyt crowd or the Mathew's crowd with my Ultra2 (which I really like by the way)
 
Chris - specialty archery products makes a new peep called the hunter peep, it is a large peep that you can put a verifier lens in or different aparatures to suit your needs, it also has a small hood over the fornt of the peep to help keep the sun out of your eye. It comes with a tube to help put your peep in the right position each time. CIA has them in stock. Going to try that this year!
 
Ghost the only big diffrence between the 2 is the riser design. The brace height and Axle to Axle is identical. The grip on the V-tec is slightly larger than the one on the X-tec. The V-tec also has the new limb saver design on them.
 
Ghost,

Also, I don't believe the draw length can be changed on the XTec, but it can on the VTEC.
 
The draw length can be changed on both bows as long as the bow has the cam 1/2 system. Now if you had the spiral cam (which is not offered on the new V-tec or X-tec unless it came directly from the Hoyt custom shop) then you would have only one specific draw length.
 
You must log in or register to reply here.
Top Bottom