• Dear User,

    We had issues in getting your old password work with the new version of the software, henceforth kindly Reset Your Password here

    You won't be able to login with your old password

    If you do not receive the Password reset request within a few minutes, please check your Junk / Spam E-mail folder just in case the email got delivered there instead of your inbox. If so, select Not Junk, which will allow future messages to get through.

    If you still need assistance, email [email protected]

    We appreciate your patience and understanding on this matter.

What tape number at 285 FPS


New Member
I know a lot goes in to tapes. I’m running an Axcel xp sight. Ritual35 at 63.4# and 27.5” mods at 75%. Sight is mounted on lower riser holes and sight body mounted on high test holes to bar. ( lower the sight housing means more distance) my arrows are center arrow right above center berger hole. All calculations and chrono says 285 fps(3D rig) edge of scope is 4.5” from edge of riser. Pin to center peep is 28” and center peep to center arrow is 3.75”. Seems like an awful low sight tape for this setup. Running a #10 tape. What’s some of you guys tape number at 280-290 FPS?


Life Member
Sight tape is as much dependent on arrow weight and peep height as it is on speed - no shortcut to give you an exact number.
Dial it in at 20 real well and then see where she hits at 50 - you'll soon know if you need a faster or slower sight tape.
Top Bottom