MO-APE
Member
I just switched our home PC out to a Mac, I typically took all my "dirty" SD cards from the field and reviewed them on our PC then formatted the SD card and was always plug-and-play back in the field with clean cards.
I've tried all the format options on the Mac, but most cameras show "invalid card or locked card". I run various models of Reconyx, Moultrie and Bushnells. They typically work on all cameras if format the card on the Moultries (obviously a very cumbersome and time consuming process).
I would assume that MS-DOS (FAT) is the format to use, but haven't had the best luck yet.
Here are the "format options" on the Mac:
-OS X Extended (Journaled)
-OS X Extended (Case-Sensitive, Journaled)
-MS-DOS (FAT)
-ExFat
Thoughts?
I've tried all the format options on the Mac, but most cameras show "invalid card or locked card". I run various models of Reconyx, Moultrie and Bushnells. They typically work on all cameras if format the card on the Moultries (obviously a very cumbersome and time consuming process).
I would assume that MS-DOS (FAT) is the format to use, but haven't had the best luck yet.
Here are the "format options" on the Mac:
-OS X Extended (Journaled)
-OS X Extended (Case-Sensitive, Journaled)
-MS-DOS (FAT)
-ExFat
Thoughts?