Search results

best thing to get if shooting BH209

Watch some of my videos on a members V2 http://iowawhitetail.com/forum/showthread.php?t=45187 Another as well\ http://iowawhitetail.com/forum/showthread.php?t=45288

No leave it, just use an 1/8" drill bit to remove the carbon out of the BP's flash channel.

Adjust the headspace for a snug fit and it should be fine with CCI 209M primers. De-carbon with a 3mm or #32 drill bit. The blackhorn209 breech plug IMO would solve all worries. http://gandersmuzzleloadingblog.blogspot.com/2012/04/cva-headspace-adjustment-shims.html

What gun does he have? Easier and cheaper making a list of must have items when we know what we are working with.

110gr BH209, 250gr Barnes TMZ " Yellow sabot is WAY to tight" CCI 209M Primers at both 100 and 150 yards. 150yard group got 5 minutes between shots. 24 shots fired today and no blow by. Breech plug stays clean and no anti seize is needed as usual. 50 yards, 2 shots at 100 yards. After...

I got Roberts V2 shooting perfect with 110gr BH209. The only draw back is the yellow sabot, its just way to tight. I have to figure out which company makes the other sabot for the boattail barnes. Gun shoots rock solid though!

heres a how to video on cleaning up BH209. Sorry about the brightness, i will redo this video some time down the road for better picture. <iframe width="560" height="315" src="http://www.youtube.com/embed/bCIZ0cJv8-M?list=UUh-Mwm7N7yLyrm8U1lVsbQg&amp;hl=en_US" frameborder="0"...

Thats great to hear! Just a warning guys but anytime you adjust the headspace, make sure you only use the primers you originally adjusted for! Some primers are longer " Winchester for example" and if you adjusted with cci "short" primers and then switch over to the winchesters " longest...

A member here forum sent me his V2 to work on after seeing the last one in the videos. This one was nasty! Not sure what grease it was coated in, but I wouldn't use that stuff again Robert! Cleaned it all off the barrel and insides, Breech plug cleaned inside and out, Coated the barrel...

Yep you can do it at home yourself. You will need to order some shims from cva though. A forum member here actually PM'd be and said, can you do to my v2 what you did to his? Yep, his is on the way today for me to go through and clean and sight in LOL. Here the the adjustment video with shims...

<iframe width="640" height="360" src="http://www.youtube.com/embed/H8vc8VHbrEc?feature=player_embedded" frameborder="0" allowfullscreen></iframe>

oh im not sure about that.

I'll send you a PM with a contact. Hes a great person to deal with and i suggest you buy the blackhorn209 breech plug AND blackhorn209 powder from the same guy. Jonathan

if you think its accurate with white hots, try blackhorn209!

Go to Bellm TC's, all the info on the hardness of the Bergara barrels is on there. You can see he makes a living fixing what TC can not. 26-27rc stainless - Comparable to Kreiger and Shilen Centerfire barrels.

Incorrect. Ive dealt with CVA since i was 14 years old, they will replace the gun and repair it even if you are NOT the original owner. Directly off the site, LIMITED LIFETIME WARRANTY DETAILS This warranty is granted by Thompson/Center Arms Company,Inc. This warranty, which shall...

An online friend sent me his CVA Accura V2 to go through and clean up properly and get the scope mounted. Blew all the nasty grease out of the action and re-oiled The owner wanted me to get it all set up for him so i cleaned it, mounted a scope on it and am currently greasing the barrel with...

I have an M44 Mosin Nagant made in 1941 that has a QLA on it :D TC copy the Russians? Personally TC needs to ditch their sloppy QLA as its garbage. CVA Steel is Winchester grade steel these days, you are obviously a rookie and follow the randy wakeman write ups. TC, knights do NOT proof test...

durasight One piece dead on mount. Durasight also makes this set up shown below