This is a new in box Huldra Arms AR-15. Comes with a new in box AIM Sports Recon 4X Scope with Illuminated Reticle.
Also comes with a tactical case and 6 brand new 30 round mags.
Specs:
<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0> <TBODY> <TR> <TD width="30%">Caliber:</TD> <TD>5.56x45</TD></TR> <TR> <TD>Chamber:</TD> <TD>5.56 NATO</TD></TR> <TR> <TD>Barrel Length:</TD> <TD>14.5" - Permanently Affixed
Flash Hider
</TD></TR> <TR> <TD>Barrel Twist:</TD> <TD>1:7 Right Hand M4 Feed Ramps</TD></TR> <TR> <TD>Barrel Profile:</TD> <TD>Government Contour</TD></TR> <TR> <TD>Barrel Material:</TD> <TD>CrMoV 4150</TD></TR> <TR> <TD>Barrel Coating:</TD> <TD>Melonite</TD></TR> <TR> <TD>Barrel Lining:</TD> <TD>Melonite</TD></TR> <TR> <TD>Upper Receiver:</TD> <TD>Dry Film Lubed - T Marked</TD></TR> <TR> <TD>Gas Piston System:</TD> <TD>Mid-Length</TD></TR> <TR> <TD>Trigger:</TD> <TD>Single Stage</TD></TR> <TR> <TD>Stock:</TD> <TD>Magpul CTR (Compact/Type
Restricted) Mil-Spec
</TD></TR> <TR> <TD>Fore Arm:</TD> <TD>Samson Evolution Series
6061 T6 Aluminum
Mil-Spec Hardcoat Anodized
</TD></TR> <TR> <TD>Flash Hider:</TD> <TD>Reduced Radius
Elongated Flash Hider
</TD></TR> <TR> <TD>Overall Length Retracted: </TD> <TD>31-1/4"</TD></TR> <TR> <TD>Overall Length Extended:</TD> <TD>34-1/3"</TD></TR> <TR> <TD>Overall Weight:</TD> <TD>6.6 lbs.</TD></TR> <TR> <TD>Overall Weight With
Detachable Rails:
</TD> <TD>6.8 lbs.</TD></TR> <TR> <TD>100 Meter Accuracy:
</TD> <TD>1" MOA
</TD></TR></TBODY></TABLE>
$1,300.00 Firm. Will need permit to purchase. I'm in the Des Moines area but I travel all over the state for work so delivery may be an option.
Any interest send me a PM.
Also comes with a tactical case and 6 brand new 30 round mags.
Specs:
<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0> <TBODY> <TR> <TD width="30%">Caliber:</TD> <TD>5.56x45</TD></TR> <TR> <TD>Chamber:</TD> <TD>5.56 NATO</TD></TR> <TR> <TD>Barrel Length:</TD> <TD>14.5" - Permanently Affixed
Flash Hider
</TD></TR> <TR> <TD>Barrel Twist:</TD> <TD>1:7 Right Hand M4 Feed Ramps</TD></TR> <TR> <TD>Barrel Profile:</TD> <TD>Government Contour</TD></TR> <TR> <TD>Barrel Material:</TD> <TD>CrMoV 4150</TD></TR> <TR> <TD>Barrel Coating:</TD> <TD>Melonite</TD></TR> <TR> <TD>Barrel Lining:</TD> <TD>Melonite</TD></TR> <TR> <TD>Upper Receiver:</TD> <TD>Dry Film Lubed - T Marked</TD></TR> <TR> <TD>Gas Piston System:</TD> <TD>Mid-Length</TD></TR> <TR> <TD>Trigger:</TD> <TD>Single Stage</TD></TR> <TR> <TD>Stock:</TD> <TD>Magpul CTR (Compact/Type
Restricted) Mil-Spec
</TD></TR> <TR> <TD>Fore Arm:</TD> <TD>Samson Evolution Series
6061 T6 Aluminum
Mil-Spec Hardcoat Anodized
</TD></TR> <TR> <TD>Flash Hider:</TD> <TD>Reduced Radius
Elongated Flash Hider
</TD></TR> <TR> <TD>Overall Length Retracted: </TD> <TD>31-1/4"</TD></TR> <TR> <TD>Overall Length Extended:</TD> <TD>34-1/3"</TD></TR> <TR> <TD>Overall Weight:</TD> <TD>6.6 lbs.</TD></TR> <TR> <TD>Overall Weight With
Detachable Rails:
</TD> <TD>6.8 lbs.</TD></TR> <TR> <TD>100 Meter Accuracy:
</TD> <TD>1" MOA
</TD></TR></TBODY></TABLE>
$1,300.00 Firm. Will need permit to purchase. I'm in the Des Moines area but I travel all over the state for work so delivery may be an option.
Any interest send me a PM.
Last edited: