F
fitzt
Guest
Need some HELP!!!! I have had this happen three times now.
Using (2) 50 grain Pyrodex pellets, TC Mag Express sabots 240 Gr. & Winchester W209 Primers IN a Knight Disc 50 cal. Muzzle loader
The primer is going off, then there is a delay before the Pellets go off. This happen with a fresh load installed that morning, then I took another shot and it fired fine.
The only facts that I have Are:
1)I bought the X-Fire Breech plug.
2)The barrel, and everything was cleaned.
3)I have been reusing the plastic discs.
4)I have been putting the pellets in with the bright spot to the breech plug.
5)I have noticed while using the speedloaders they can break the ends of the pellets a little.
6)Ramrod is marked to make sure everything is tight.
Using (2) 50 grain Pyrodex pellets, TC Mag Express sabots 240 Gr. & Winchester W209 Primers IN a Knight Disc 50 cal. Muzzle loader
The primer is going off, then there is a delay before the Pellets go off. This happen with a fresh load installed that morning, then I took another shot and it fired fine.
The only facts that I have Are:
1)I bought the X-Fire Breech plug.
2)The barrel, and everything was cleaned.
3)I have been reusing the plastic discs.
4)I have been putting the pellets in with the bright spot to the breech plug.
5)I have noticed while using the speedloaders they can break the ends of the pellets a little.
6)Ramrod is marked to make sure everything is tight.