Search results

Try to reseat the Breech plug into the barrel where it screws into the barrel, it might be dirty where the nose of the plug seats into the barrel. When ever you switch to a new plug, you need to reseat it to fit that barrel, use something to tighten it down into the barrel then unscrew it then...

When you cleaned it, did you take the firing pin out, unscrewed it from the face of the receiver. If you did, when you reinstalled the firing pin, is the screw flush with the receiver. Did you switch primer. When you close it up, do you snap it shut, sometimes if you do not have it shut tight...

Check out this web site and e mail Luke what he thinks would be the best way to go. http://www.smokelessmz.com/index.html I have a Remington 700 with a 45 cal Mcgowen barrel (older Build), at 300 yards will shoot 1.5 inch group. Have a 416, built on a 700 CF frame, That will do the same...

Your gun will let you know what it likes, when you are getting a tight group and it starts to open up, then you will know what it likes for the best accuracy.

How far will you be shooting, or feel you want to shoot and still be accurate and feel good with the shot? 150 yards or less, 100 gr of Bh 209 still has plenty of power to take a deer at that range, 110 gr of powder, I have taken deer out to 265 yards, and coyotes out to 300 yards, but I do a...

I have 2 CVA Accura MR, 1 has a tight barrel that I had to use the Harvester Black Crush Rib sabots with which ever bullet it liked, the other one liked the Harvester easy load, Black smooth sabots, As far as bullets, the TEZ's and the Hornady Mono flex, shot great out of them, along with just...

Here is a good video for cleaning your Muzzleloader. http://www.frontiermuzzleloading.com/t6648-cleaning-your-new-inline-muzzleloader

You said that you ordered the BH 209 Breech plug, you will need an 1/8 th inch drill bit to clean the carbon out of the plug in front of the primer, do it after 8 or 10 shots, use your fingers with the drill bit. Also for the other ML shooters, if you are getting blow by on your primers, they...

X2 on what HorseDoctor said, a very accurate SML muzzleloader, Luke does a heck of a job and builds some very nice outfits. He has a Facebook page that shows some of his toy's.

Real nice shooting, you can try 3 pellets, if the group opens up then go back to 2 pellets, or switch to BH 209.

Here is a write up and bullet test of the Hornady Mono Flex 250 gr,along with picterue of what it looks like. http://www.huntingnet.com/forum/black-powder/401070-250g-monoflex-50g-blackhorn.html

The Bor Locks can be very accurate if you have a tight barrel, they will open up like a Barnes Bullet out to 125 yards, then after that they will not, unless you are pushing them with 130 gr of BH 209 out to 200 yards. The SST's are good for paper punching, They mushroom when they are used on...

Have seen other trail cam pictures of them along the western edge of Iowa. North of Sioux City

Have been dealing with Terry and his wife for a few years now, They are a great group to work with, They sell out of bullets real fast, and I mean fast, If you have a couple of loose fitting bullets, I use a small sized socket to enlarge the base just a little, then feed it down the barrel nose...

Here is a good video, and he has other videos also about cleaning. https://www.youtube.com/watch?v=jiMl4jkLcxw

use any cleaner you would use on a centerfire rifle..like Hoppes#9..soap and water does not work for BH209..actually makes a mess and harder to clean... All I do is put a little Hoppes on a bore mop..run it up and down barrel...let it sit a few minutes...run a brush down ..then a few dry...

Here is the Web site of who built it. http://www.cmcfirearms.com/ Cole is his name, Carlos from Ed's gun shop is a friend that set it up, and is very good at working with you on regular ML and the SML, Powder out of the 416, will be IMR 4350, PM me for more info.

Here is one I just had built and should have it this week. It will reach out to 600 yards, along with the 45 cal SML shooting sabotless. http://dougsmessageboards.proboards.com/thread/18364/phoenix-range http://dougsmessageboards.proboards.com/thread/18417/phoenix-range

What I liked about the DOA was the eye relief, better then some. Now I am using the Leupold VX R, and a Vortex Viper on my SML's with the CDS dial, Great glass on both, Best of all Great warranty on them.

What gun were you shooting? Do you have the right BP for BH209 if shooting a CVA Have you cleaned the Breech Plug with a drill bit, to clean the carbon out of it, I will clean it after every 10 shots when at the range, and when done, Was the bullet seated tight on the powder? BH209 likes to have...