Search results

This is what I use also, and then pour it into these, they have long and short ones, these are the long ones that I use for the range or as speed loaders for hunting.

Lanes powder tubs. they make great speed loaders, Put your bullet and sabot in, nose down and load your powder charge, and your ready to go. I shoot 110 gr of BH 209, and there is still room at the top. Also the powder will not get by the sabot, they sell for $35 for 100 of them

Have been using the Barnes 250 T-EZ's last couple of years, Great blood trail if they went that far, Tried the new Hornady 452/ 250 gr Monoflex bullets, They open up like a Barnes, and have the same out come, Did a water jug test at 100 and 200 yard test, they opened up like a flower. During 1st...

I have 2 of the CVA MR rifles, both are great shooters, they will shoot just about anything that you want to stuff down the barrel. very accurate, 1 of them I will be using it sabotless this year. They are nice to carry, light weight and being shorter they workout real nice in the blind when...

In my Accura V 2, and the MR, I use 110 grains by Volume or 77 gr by weight. when you say units are you weighing it or measuring it?

I would pull the scope off and check the base screws and use locktite on them and reinstall the screws, I had a problem like that and 1 of the screws had broken. Check the flash channel on the breech plug and make sure it is clean of the carbon build up and check the fire tip by the powder that...

The winchester 209 primers will work if they are the 209w for shot guns just fine, they are a longer primer than the cci, make sure that you keep your flash channel of the Breech Plug cleaned out real good, the build up of carbon in the flash channel will be a little harder than the CCI primers.

http://www.mcmaster.com/#9262k611/=qxt771 This is a web site for metric rubber o-rings that go in the primer pocket, 1 will last 20 or 25 shots, then just replace it, It will help with your blow back from the primer, Have used them in the older CVA Optimas, and a couple of other with hex head...

Where could I find info about the meeting?

Sent you a PM from sioux city. Dave

Talk to Carlos, He will get you some, also here is his E-Mail vilorio2005 Ed's Gun Shop 5560 US 1 HWY Vass, NC 28394 (910) 692-7936

Check this web page out. Ameristep- Ground Blind Snow Tangle Covers

They make some nice packs, and they are guaranted for life, even if you pick it up at a garage sale. Dave

Flitz metal polish is also something else you can use. Dave

I've been there before with cleaning a black powder barrel that had light rust from one end to the other. Here are the steps I used with success. The fella told me it never rusted again with proper cleaning. 1. I started off with getting all the loose stuff out with a few strokes using a nylon...

The farmer next to where we hunt, has lost a couple of his cattle to them.

So far between 1st Shotgun season and Late season Muzzy, My CVA Accura V2 has put down more coyotes than Deer , 5 to 2 , But I'm having fun. Here are 2 from the last 2 day's. Dave

Nice going.

I have one, picked it up a couple of weeks ago, Love it, I've taken it out a couple of times, using Hornady SST 250 gr bullet, 75 gr of BH 209 powder. 50 yards 2 inch group with a Red Dot scope on it, Want to pick up a good scope for it and I should be able to get that size of group at 100...

Filled both of my tags for 1ST shotgun, Decided to take a walk and pick up my trailcams, went to check the cards and found these on it