Buck Hollow Sporting Goods - click or touch to visit their website Midwest Habitat Company

The cedar tree project with a tree shear w/grapple

Sligh1

Administrator
Staff member
Started just now. Here’s a few peaks at progress…. No deer use. Too thick. Thinning, lanes & new vegetation (not more cedars) is goal here. Will see Branches on ground as I started this with chainsaw & quickly changed tactics.


DD7A100F-112A-4DBC-9117-392AE131AC9C.jpeg
1A38F1BD-E2D5-4BB8-9455-85C36B90022B.jpeg
7746D27E-BBB4-46FB-A7FB-C7FAA44B340A.jpeg
EA33121C-F186-4EB0-A574-0B92EC293DA3.jpeg
1A38F1BD-E2D5-4BB8-9455-85C36B90022B.jpeg
A0C19B2F-2157-4EE8-BDA0-D8D6DAFB3EDE.jpeg
5F32F64C-40E7-401B-B22B-0B04EB42EF76.jpeg
BF4B1F45-3220-4C58-BDF2-B9C7BE75F1AA.jpeg
EDB9D3EF-F474-4C4C-8366-65017DCDED60.jpeg

F479B956-A995-4158-B84A-C4F6172AEA48.jpeg
 
Can you catch a video of that thing working? Are you pre-clearing branches in order to get the shear that close?
 
Can you catch a video of that thing working? Are you pre-clearing branches in order to get the shear that close?
Oh yes. I got good video ;).
I started with chainsaw & that’s how I was tackling lanes. Too slow. So disregard cut branches!!
Video soon.
 
Did you try pulling them at that size with a tree/post puller for that skid loader?
I just bought one of those and wondered how big of a tree it would pull?
 
Did you try pulling them at that size with a tree/post puller for that skid loader?
I just bought one of those and wondered how big of a tree it would pull?
Yes. Most were way too big. I tried digging roots & pushing tree with puller. That huge CL fabrication one. Couldn’t do em. Sheers were like butter.
 
Have you ever run cattle through cedars? Seems like after cattle bust through and make lanes, the deer like them more(after the cattle are gone). The cedars you have don't look like a rabbit could get through.

Now you have to have a bonfire party, how else to get rid of those tops?
 
Have you ever run cattle through cedars? Seems like after cattle bust through and make lanes, the deer like them more(after the cattle are gone). The cedars you have don't look like a rabbit could get through.

Now you have to have a bonfire party, how else to get rid of those tops?

I have not done the cattle but that does make sense. The fire is gonna be INSANE!!!!!! As of now- I’ll have so many that I will need to burn some. No rush & not a big deal.

I’m running 1/2 to 1 acre an hour. That really isn’t too bad. The first part I really hacked an acre super hard. The rest - I’ll probably leave trees about 20-30’ between them.
For larger cedars, I’ve tried mulchers, chainsaws, dozers, tree pullers & now tree shear with grapple. IMO- tree shear with grapple is the ideal tool. Everything has its +/-
Tree shear w/grapple..

POSITIVES:
-fast cut on any cedar about 14” or smaller as long as not too top heavy. instantly opens the area up
-not hard on machine like mulcher & with so much top material - way faster. No residue on ground to choke out new growth.
-control tree with grapple to put in pile out of the way & burn later.
-no top soil loss like dozers can do.
-impressively fast. To me, 1/2 to 1 acre an hour on over run cedars is pretty darn fast.
-trees 4-8”….. u can usually figure out a way to grab several at a time by pressing tree u cut into next tree & bundling them.

Negatives:
- giant trees (u will understand the size for a low small machine like skid steer) are a no go.
-does leave a stump. Would be a “no-go” if u wanted to farm this area. Need an excavator, dozer, stump remover, etc if stumps will be an issue & don’t use shear in that case.
- a bit of extra time to move the tree to a pile. Will probably have several piles. Which likely mean u will burn them later or have fantastic rabbit hunting.
-really small cedars…. Probably need to mow or snip them somehow. Shears would take too long.

COST: chainsaw the cheapest of course. Then tree puller. Then shears. Mulcher next. finally dozer & excavator.

*side note for shears with grapple…. This one came with a built in sprayer. U press button & herbicide like garlon would go on the stump. Not needed for cedars but the sprayer would be a dream for black or honey locust, multiflora rose, bush honey suckle, ironwood, etc.
 
Last edited:
Looks like it get real close to the ground.?
Very. If you wanted to get them at ground level- just take an extra second to make sure it’s seated deep. U really can get them to cut barely BELOW dirt if take time & tree isn’t too big. Only ones above ground were the giant ones I did.
 
Yikes! That saw is MEAN. Knowing how jerky I am when running a skid...I would probably cut my arm with that thing. :)
 
How Have you found tree shear to work compared to tree saw?


Sent from my iPhone using Tapatalk
That’s a legit tool!!!! Not the tool for cedar thickets cause need to get em out & into a pile. Unless u wanted to switch to a grapple bucket after. Those would be amazing for any farmer that wanted tree branches off field edges too. I can’t bring myself to prune back field edges since I want the scrapes & expanding edge. But I’m about polar opposite of most farms. ;).
 
Started just now. Here’s a few peaks at progress…. No deer use. Too thick. Thinning, lanes & new vegetation (not more cedars) is goal here. Will see Branches on ground as I started this with chainsaw & quickly changed tactics.


View attachment 124474View attachment 124475View attachment 124476View attachment 124477View attachment 124475View attachment 124470View attachment 124471View attachment 124472View attachment 124473
View attachment 124478
Do you still have the sheer or did you abandon it for the mulcher? I'm looking to try a new attachment for dealing with cedars and some other junk this year.
A puller would be the most economical but limited on size. Is a sheer worth the cost?
 
Do you still have the sheer or did you abandon it for the mulcher? I'm looking to try a new attachment for dealing with cedars and some other junk this year.
A puller would be the most economical but limited on size. Is a sheer worth the cost?
I don’t like the puller. Unless the trees are small. That’s just preference though. Big trees are just a pain in butt with puller.
Mulcher for sure gets stumps gone the best. Tree shear is nice but for sure will have the worst results of 3 for stumps.
They all have their place I guess. Mulcher is by far the most versatile.
 
Did running the tree sheer cause any damage to the machine( cosmetic or otherwise, windshield wipers/lights/hydo hoses?)

Haven't personally used those but wondered if the cedars would be tough to get to the trunk....

After doing the project would a small escavtor w/ thumb have been better? Little soil intrusion around root balls but no stumps left behind...
 
Have you ever run cattle through cedars? Seems like after cattle bust through and make lanes, the deer like them more(after the cattle are gone). The cedars you have don't look like a rabbit could get through.

Now you have to have a bonfire party, how else to get rid of those tops?
Old post but wouldn't they be good for structure in ponds? Pile on the ice and let them sink in spring?
 
Top Bottom